Calibrate HMI

Calibrate the touchscreen on the HMI Monitor

From the HMI, using a keyboard, log into your HMI using the username and password given by Customer Service. If the HMI is on the browser screen you can press the <ctrl><alt><F1> key combination to get to a login prompt.

To start the calibration run the following command:

caltouch

 

This will initiate the calibration program. Follow the on screen prompts by touching the areas on the screen indicated by the program. Once the monitor is calibrated you will be brought back to the Browser screen and your monitor should now be calibrated. If you need to re-calibrate you can follow the instructions above once again.